To add extra radials click the "Add a radial" check box under the "tools" menu. Then the "Additional Radials" box will appear.
Use the "Number of radials" slider to set the number of extra radials you wish to add to your printouts.
Tab to the "Azi" text box and insert a radial azimuth value from 1 to 359. (Avoid using radial azimuths that will normally appear, otherwise you may have two radials with the same azimuth in your printout.)
The "Percent Field" text box will automatically fill in. If there is a directional pattern the percent
field value for the desired azimuth will be interpolated from the pattern, otherwise the percent field value will default to a one (or 100 percent - a full field) for an omni-directional antenna.
Next, click the horizontal slider to the immediate left of the "Azi" text box input. This will advance the "Azi #" to the next radial azimuth to be added.
Now, repeat the process by adding the radial azimuth for your next addition. Continue until you have assigned all additional radial azimuths.
All additional radial azimuths added to a study will appear at the end of each study. The elevation and HAAT values will be considered in the average elevation and HAAT average figures, as per FCC requirements.