Printing Setup

Printing is set automatically to Landscape mode. All except "zoomed printing" should be carried out from the InterDLG home page.

Printing a Frame

Using your mouse click on the frame name (or map name) you wish to print. (If you just created the map, it is already selected.)
Click the "Print" command button from the Main Screen.

Printing Multiple Frames (Batch Printing)

You can print multiple frames by selecting the "Multiple" command button and then clicking the index name of each frame you wish to print. You will hear a beep after each selection has been made. When you are ready to print your choices, click the "Print" command button. Your selections will be summarized. You may delete a selection from the print queue using the delete command button. When you are ready to print the selections click the "Continue" command button.

Plotting

Once you have selected a COM port for plotting on the "Defaults" setting screen plotting will be activated. Just click "Print" on the main screen to activate your plotter. It should be noted that if you have not selected a valid COM port the plotting routine may freeze requiring a re-boot of your computer.