When the program first starts the main window will be empty. Choose "New" from the "File" menu to create a new study. When a study is open, the main window will look like this:
The top part of the window defines the reference station. Use the "Edit Reference" button to load a station record from the database or enter the station parameters manually. Generally, the non-directional base configuration should be entered here.
The measured radials are listed below the transmitter configuration. Choose "Add New Radial" from the "Study" menu to add a new measured azimuth to the study. Each row displays a measured azimuth and has buttons for performing operations for that azimuth:
Graph - This opens the graph window for the azimuth.
Points - Opens the points window for the azimuth.
Conductivity - Opens the conductivity window for the azimuth.
X - This button will remove the azimuth from the study.